Table of Contents
Cleaning out water tanks at regular intervals is essential to ensure the health of people everywhere and a good water supply. The water from the water tank is used for a variety of purposes, including cleaning, brushing, bathing, and even cooking. If the tanks are not cleaned at regular intervals, there is a chance that the inhabitants’ health would suffer as a result.
About sixty percent of infections that affect people are transmitted via drinking water. The most common reason that people get unwell is due to polluted water system, and the most common way that water becomes contaminated is either because of incorrect maintenance or because the water tank is not cleaned at regular intervals.
Wherever there are a significant number of people working or living in the same location, such as an apartment complex or a commercial building, a medium or big office complex, restaurants, etc., cleaning and sanitising the water tank is of the utmost importance. It is the responsibility of whomever owns the property or manages the property to ensure that the water tank is kept clean and that the water is not contaminated.
Instructions for Cleaning out The Water Tank
The vast majority of them are unaware of the need to routinely clean their water tank. It is essential that water storage tanks be kept clean in order to avoid sludging, sediment buildup, and the spread of illnesses that are transmitted by contaminated water.
When it comes to managing the water facilities of a building, one of the most crucial aspects to focus on is keeping the water tank and reservoir clean. When it comes to cleaning a water tank, there are typically two approaches that are used. One approach is the manual method, in which a worker will go into the tank and scrub the walls with a brush while submerged.
Tanks may also be cleaned using high-pressure water jet cleaners, antibacterial agents, and disinfectants as an additional option. This process is also known as the automatic cleaning of water tanks.
The Water Tank Will Be Cleaned by Hand
The walls of the water tank were scrubbed with a brush using this time-honored approach of cleaning the tank, which required the employee to climb inside the tank. Cleaning the water tank with this approach requires more work and takes a longer amount of time.
In this technique, the tank is emptied first, and this may be done with either a pump or an open exit. The next step is for the worker or person responsible for cleaning the water tank to climb inside the tank and use detergent and water to clean the inside walls. After that, any remaining traces of detergent are wiped off of all of the interior surfaces with only regular water.
After cleaning it, the water tank has to be disinfected with HTH chlorine. If you want to make sure that the tank is completely cleansed, you should let the chlorine sit in the tank for between 12 and 24 hours. Empty the tank completely, and take special precautions while disposing of the disinfecting water, since it will have a significant amount of chlorine in it.
After refilling the tank with clean water, let the water sit at room temperature for half an hour. Use a comparator to compare the amount of chlorine that is still present in the tank using a It is safe to use the tank for water storage if the concentration of chlorine in the water has less than 0.5 mg/l of residual chlorine.
If the concentration is higher than expected, the tank must be emptied completely and then refilled with clean water. Conduct further tests to determine whether or not the chlorine content is more than 0.5 mg/l.
In this approach of cleaning water tanks, there are three essential procedures that must be completed in this order: first, the tank must be cleaned; second, the tank must be chlorinated; and third, the chlorine concentration must be checked.
However, when dealing with a water tank of a significant size, this procedure becomes very challenging and time consuming. The manual approach is appropriate for use in individual residences or buildings with water tanks of a relatively modest capacity.
Cleaning of water tanks by means of automation
Cleaning of water tanks that are automated allows for time and financial savings. You may be shocked to learn how much money you can save by automating the process of cleaning your tanks, particularly if you currently do it manually or make use of the fill-and-drain approach.
Huge apartment complexes, businesses, or other structures that have been outfitted with large water tanks are ideal candidates for automated tank cleaning systems. Within a few hours, specialists and firms that specialise in automated tank cleaning equipment may come at your home with their gear and clean your water tanks.
One benefit of using automatic tank cleaning equipment is the amount of time it saves you. In addition, there is no need for you to clean the water tank by crawling about inside of it. Demonstrations of the goods offered by businesses that provide automated tank cleaning equipment are often made available by such businesses so that customers like you may choose the most appropriate product for their tank cleaning needs.
Choosing the appropriate cleaning nozzle for the tank is an important step in achieving a thorough cleaning. Always be sure to utilise the filter so that you can avoid having the particles in the liquid block the nozzles or cause the rotations to stop.
The manual cleaning of the manhole and any surrounding filth, mud, or algae is followed by the fully automated cleaning of the tank. The subsequent step is cleaning the whole of the inside with a specialised high-pressure jet wall.
